Homesteading Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
749 Posts
Discussion Starter #1
I have a Xantrex Inverter (Trace Engineering) version 4.20. I am wondering if there is a way to turn down the brightness or light on the display? I looked in the manual but can't seem to find it. Thanks Chris
 

·
Registered
Joined
·
1,246 Posts
canfossi said:
I have a Xantrex Inverter (Trace Engineering) version 4.20. I am wondering if there is a way to turn down the brightness or light on the display? I looked in the manual but can't seem to find it. Thanks Chris
I am not familiar with the circuit on the inverter, but I know you can dim the display but it would Get real complicated if you don't Have Alot of knowledge on doing this. Why don't you just Shade the display with one lens out of old pair of sun glasses or get a small scrap piece of window tinting. Lowering the voltage to the display would not Save Hardly any Wattage.
 

·
Registered
Joined
·
7,883 Posts
Don't you have a "owners manual" . . . . . .??

And do you know how to get into the advanced settings . . .??
 
1 - 4 of 4 Posts
Top