How do I clean this? - Soot/smoke stains brick/stone fireplace

Discussion in 'Homesteading Questions' started by DenverGirlie, Jan 21, 2010.

  1. DenverGirlie

    DenverGirlie Well-Known Member

    Messages:
    1,187
    Joined:
    Dec 22, 2005
    Location:
    Evergreen, CO
    Here is a photo:
    http://www.flickr.com/photos/14212156@N08/4268397240/


    How do I clean this?

    With what cleaning agent (comet, vinegar, oven cleaner)?
    With what abrasive (wire brush, sponge, etc)?
    If I clean it, will it really come clean? Or is it waisted effort and I should just accept?

    We are going to paint the ceiling, but wondering if I can successfully remove the soot/ smoke stains on the bricks?

    I have not carefully inspected the stone/brick, it seems solid, but will admit I have not gotten up real close and checked it out yet.

    If it makes any difference, the fireplace most likely only burned pine.

    I will vacume the "wall" first, but then I am at a lost what else to do. Floor is some sort of wood tile product? Parkay? I have no idea, but wood floor takes out pressure wash solution.

    Any advice appreciated, thanks
     
    Last edited: Jan 21, 2010
  2. TK04

    TK04 Well-Known Member

    Messages:
    48
    Joined:
    Apr 8, 2009
    Tells me it's a bad link. I know someone else with the same problem so am interested to hear any solutions.
     

  3. Tricky Grama

    Tricky Grama Well-Known Member

    Messages:
    31,762
    Joined:
    Oct 7, 2006
    Location:
    N. E. TX
    "Page Not Found"

    But, I had this problem on a white brick fireplace & I used a stiff brush and solution of tide & a little bleach. Kinda heavy on the tide.

    Patty
     
  4. CocalicoSprings

    CocalicoSprings Well-Known Member

    Messages:
    200
    Joined:
    Mar 11, 2008
    Location:
    Pennsylvania
    trisodium phosphate and fels naptha soap.....wear gloves and eye protection
    keep kids and dogs out of the area.
     
  5. DenverGirlie

    DenverGirlie Well-Known Member

    Messages:
    1,187
    Joined:
    Dec 22, 2005
    Location:
    Evergreen, CO
  6. Humburger

    Humburger Well-Known Member

    Messages:
    755
    Joined:
    Sep 13, 2007
    Location:
    Ohio
    Pumice stone on the bricks. Clean the painted wall with ammonia in water and then sanding before painting. It won't come totally clean, but the new paint will stick.
     
  7. oberhaslikid

    oberhaslikid Well-Known Member Supporter

    Messages:
    1,521
    Joined:
    May 13, 2002
    Location:
    Ohio
    Try some Borax. in a bucket of water and a scrub brush.
     
  8. westbrook

    westbrook In Remembrance

    Messages:
    1,600
    Joined:
    May 10, 2002
    I have a quartz fireplace, I use soapy water and a brush. My husband used engine cleaner on it once and it came clean.
     
  9. artificer

    artificer Well-Known Member

    Messages:
    964
    Joined:
    Feb 25, 2007
    Location:
    Wisconsin
  10. mdharris68

    mdharris68 Well-Known Member

    Messages:
    502
    Joined:
    Sep 28, 2006
    Location:
    NE Kansas
    I use Rutland Brick and Stone cleaner. I have a 32 oz spray bottle that I found in the basement of the house when I bought the place. Don't know if it is still available but it works. Dissolves smoke stains, creosote, and baked on soot. It is an alkaline product instead of acid. I will aso add that I use it primarily to clean the soot off the glass on my buckstove, and when I spray it, the soot runs off and wipes clean with little effort. I know glass is easier to clean than brick, but I dont have the same problem your having.

    Just looked on google and found some on Amazon.com
     
    Last edited: Jan 22, 2010
  11. retire2$

    retire2$ Well-Known Member

    Messages:
    273
    Joined:
    Feb 11, 2003
    Location:
    Maryland
    Is the floor concrete and the ceiling wood? If that is the case, why not try a pressure washer and immediately vaccuum the water from the floor?
     
  12. Shrek

    Shrek Singletree Moderator Staff Member

    Messages:
    11,217
    Joined:
    Apr 30, 2002
    Location:
    North Alabama
    I remember watching my father use the ashes , water and a brush to clean the fireplace brick in my childhood home during spring cleaning and then using a garden sprayer of water to pressure wash the sludge into the ash chute at the back of the fire place.

    After that we would use the garden hose to wash out the chute outside and use a street broom to scrub the patio with the sludge.

    As a preteen I was amazed that ashes bleached the soot and patio dirt stains away. Now I understand that all my father was having us do was give the fireplace and patio a weak caustic soda cleaning each spring.
     
  13. Alice In TX/MO

    Alice In TX/MO More dharma, less drama. Supporter

    Messages:
    30,738
    Joined:
    May 10, 2002
    Location:
    Texas Coastal Bend/S. Missouri
    Make sure the chimney is drafting correctly before lighting another fire. It shouldn't be putting smoke in the room.
     
  14. NJ Rich

    NJ Rich NJ Rich

    Messages:
    1,239
    Joined:
    Dec 14, 2005
    Location:
    Springsteen Area of New Jersey
    Without being able to actually look at the fireplace I think the smoke box is undersized. That is the area over the front opening and the flue. Smoke accumulates there and the draft pulls the smoke out.

    My brother-in-laws fireplace smoked unless he had a fire at the very back of the fireplace. On a windy night it would smoke anyway. I cut and painted with heat resisitant paint a 4" x 6" piece of steel angle the width of the front opening that we bolted onto the steel lintel supporting the brick over the opening. This required drilling and tapping holes in the lintel and drilling holes in the 4" x 6" angel. We used 1/4 X 20 machine bolts. This closed the opening of the front of the fireplace by 6" in height and increased the size of the smoke box. It totally fixed his problem. A double sided fireplace has its own problems I am not familiar with. You are at risk of a fire or at least health problems

    I believe you need a professional to inspect the fireplace and make whatever changes need to be made.

    Just my 2 cents. Best to ya, NJ Rich :cowboy:
     
  15. Cabin Fever

    Cabin Fever Life NRA Member since 1976 Supporter

    Messages:
    15,062
    Joined:
    May 10, 2002
    Location:
    Between Crosslake and Emily Minnesota
    Use 10% muriatic acid. Wear gloves and eye protection.

    I think you either have a bird's nest in your chimney or you forgot to open the damper....yikes!
     
  16. jmtinmi

    jmtinmi Well-Known Member Supporter

    Messages:
    943
    Joined:
    Feb 25, 2009
    Location:
    Mid Michigan
    The smoke on the ceiling will have to be 'sealed' When I worked for a Contents Restoration Company all painted surfaces needed to be wiped down to 'set' the smoke before another coat of paint is applied.

    It would be a good idea to contact a Contents Restoration Company for idea on how to handle the brick too. They might have some special products to use.
     
  17. DenverGirlie

    DenverGirlie Well-Known Member

    Messages:
    1,187
    Joined:
    Dec 22, 2005
    Location:
    Evergreen, CO
    thanks all.

    I am getting the chimney's (3) swept on Friday, and am committed to scrubbing the wall for an hour.

    We are moving the bulk of our items in next Saturday (weather pending), we will get to the ceiling later.