Has anyone done a DIY automatic gate opener?

Discussion in 'Homesteading Questions' started by nathan104, Mar 17, 2008.

  1. nathan104

    nathan104 Well-Known Member Supporter

    Messages:
    1,125
    Joined:
    Nov 15, 2007
    Location:
    East Texas
    I am wanting to put in a solar automatic gate opener at the entrance to my driveway. I had originally got a quote from a local fence installer of $2800 which includes everything from posts, gate, opener and install and two remotes. Or, $1650 if I provide the gate and posts. He said he uses high quality openers which are the Patriot 1 models which are vastly better than the ones sold at tractor supply company.

    Well, I was wondering if anyone here has installed their own. And, if anyone has used the ones from TSC and how you like them. I will have to have a solar model. But, it doesnt seem like they would be very hard to install. And, the openers at TSC are not very expensive(compared to the quote anyways). Im sure I can acquire a used gate pretty cheap. I dont need a custom one with initials or anything.

    So, if you have installed one yourself or had one intalled professionally, let me know how you like it, any problems, and how hard it was for you to DIY. Thanks.
     
  2. hotzcatz

    hotzcatz Well-Known Member

    Messages:
    2,856
    Joined:
    Oct 16, 2007
    Location:
    Hawaii
    A friend just made an automatic gate opener. There is a post with a rope and knob where the driver can reach out the window to pull. That unlatches the gate and then a rock on a rope with a pulley pulls the gate open. The gate then opens and another latch gets it as it goes back to hold it open. He still needs to work on the gate closing part, though, but he will do that in a couple weeks when he gets back from the mainland. He may have about $10 in latches, rope and pulleys for his "automatic" gate. He also wants to watch "Babe" again since he says they had a really nice gate in that movie.
     

  3. PineRidge

    PineRidge Well-Known Member

    Messages:
    634
    Joined:
    May 2, 2006
    Location:
    WV
    We installed one of the Tractor Supply (I think they are Mule brand?) ones at our old house. It was easier to put the opener on than getting the gate set up. We had no problems with quality. The opener was slow, but we had a very heavy gate which I'm sure was the problem.

    If I ever get around to putting the gate up here, I wouldn't hesistate to buy another one.
     
  4. THETOOLMAN

    THETOOLMAN Well-Known Member

    Messages:
    772
    Joined:
    Feb 15, 2008
    Location:
    georgia
    I bought a mighty mule gate openner 5 years ago.All I have ever done to it is put a BID ford style battery on it . it has saved thousands of steps. I really have 2 of them. the sun charges the battery. this is the best thing I have bought in quite a while
     
  5. Ann Mary

    Ann Mary Well-Known Member Supporter

    Messages:
    1,309
    Joined:
    Nov 29, 2004
    Location:
    Idaho
    I have seen homemade ones that use a garage door opener to open/shut the gate. Then you can have a remote in the car to open/shut it! :) Probably some plans on-line somewhere.
     
  6. fordy

    fordy Well-Known Member

    Messages:
    9,288
    Joined:
    Sep 13, 2003
    Location:
    Whiskey Flats(Ft. Worth) , Tx
    ...............A point of Info , The cheaper gate openers have a VERY hard time closing a big gate of say 16 feet wide in Heavy winds !!! On numerous occaisons I've seen a Mule try and close a gate by having too "pull" it into a very strong head wind . It simply didn't have the Right Stuff to get the gate closed and it finally just stopped . These folks had 40 or so cow\calf pairs that could make an exit thru this gate onto a very busy farm too market road . So , I just closed it by hand , and called them and told them about their problem . You get wwhat you pay for . , fordy:cowboy:
     
  7. Highground

    Highground Well-Known Member

    Messages:
    529
    Joined:
    Jan 22, 2003
    Location:
    WV
    I saw the plans for one using a steel pipe filled with cement welded to a large hinge at one end. The other end would fit into a cement block cradle. The guy used an ATV wench with cable to raise and lower it by remote.
    As always, can't find it when I need it.
     
  8. texican

    texican Well-Known Member

    Messages:
    12,325
    Joined:
    Oct 3, 2003
    Location:
    Carthage, Texas
    My 'automatic' gate opener sometimes needs 'reminding'.... uh, honey, are you going to open the gate? or should I? :rolleyes:
     
  9. dsweeney

    dsweeney New Member

    Messages:
    1
    Joined:
    Mar 21, 2008
    Location:
    Ferris, Texas
    I installed a Patriot I gate opener on a 15' foot metal gate a few years ago. It has been very reliable and works well even in windy conditions. But you must be sure that your gate posts are very secure, preferably with concrete pads and diagonal braces -- the opener puts so much torque on the gate posts that they will eventually twist or break the posts holding the opener. I first installed the opener on "regular" wood posts -- after two or three years, I had to completely replace the gate posts with heavy metal and concrete. The opener also has to be adjusted infrequently, which just takes a small screwdriver. All in all, it was a good choice and easy to install, except for the diagonal brace and the main bracket -- I had a local welder install those for $200 or so. I also recommend getting a Stone lock for the gate, if you get a lot of wind. It adds extra security and helps keep the gate shut and aligned.
     
  10. How Do I

    How Do I Once I was seven years old

    Messages:
    3,015
    Joined:
    Feb 10, 2008
    LOL I was going to say, "Now there's a cheap gate opener!", but on second thought...
     
  11. homebirtha

    homebirtha Well-Known Member

    Messages:
    1,259
    Joined:
    Feb 19, 2004
    Location:
    Maryland
    That's why we had kids. LOL.