Homesteading Forum banner
1 - 1 of 10 Posts

· agmantoo
10,730 Posts
Gunner, I have observed the problem you have when one side of the chain becomes real dull or the manner that the teeth are sharpened vary considerably from one side to the other. When the saw cuts in an arc such as this ) the right side of the blade is sharper than the left or the left side of the chain has a problem with the teeth. This ) view is from the operators position looking down the bar. Try working on the left side of the chain with a file and see if you do not impact the ) Good luck.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.