butchering question - amt of fat/lard per pig

Discussion in 'Pigs' started by cathleenc, Nov 18, 2009.

  1. cathleenc

    cathleenc Well-Known Member Supporter

    Messages:
    4,663
    Joined:
    Aug 15, 2007
    Location:
    the flat land of Illinois
    How much back fat and how much leaf fat (internal fat) do you think you would get, on average, from your average 250 lb live weight pig? The pigs were pastured and then pen/grain finished for the final month.

    I understand that pigs differ - looking for a ballpark figure. What you might expect to get back from a butcher, to be clear.

    Here's why I am asking: took 2-250 lbs pigs to the butcher, asked for the leaf lard from both and the back fat from both. What did I get? 1-8 lb package, total. That breaks down to 4 lbs of leaf fat and 4 lbs of back fat for 2 whole pigs.

    The butcher swears that was it. I swear it cannot be it. Sounds like one pig and then maybe only part of the fat from one pig but heck, let's be generous and call it one pig.

    What do you think? this butcher, btw, tends to mess up every single order ever brought to them by anyone I've ever known, including me. Why do we return? They are a mere 4 miles from our house - the next closest is 125 miles round trip. We've taken on butchering our own sheep, goats, rabbits & poultry to avoid them - might add hogs to our 'do it yourself' list pretty darn soon.

    Be honest. If I am wrong I'd lke to know.

    thanks,
    Cathy
     
  2. Handyman

    Handyman Well-Known Member

    Messages:
    107
    Joined:
    Sep 11, 2009
    Location:
    Southern Tier, NY
    Like you said, it depends on the pig. It also depends on how much sausage you have made. If the pigs were lean, the butcher would have added some of the fat to the sausage.

    I had a 240# (estimated) gilt butchered by a slaughterhouse this fall. She looked great on the hoof. We got back 2 bags of fat, cut up into fairly large chunks, and frozen. A total of 3 gals I'd say. I did not weigh it.

    We butchered a barrow here, one of the gilt's littermates, who weighed the same. There wasn't enough fat on him to speak of.

    The gilt and barrow were raised together.


    I encourage you to butcher your own. Pigs are easy to do.
     

  3. cathleenc

    cathleenc Well-Known Member Supporter

    Messages:
    4,663
    Joined:
    Aug 15, 2007
    Location:
    the flat land of Illinois
    no sausage made at all.... so ALL the fat should have come back. For 2 hogs it certainly seems like it should have been, at a minimum, double what we got. We had the pork cut into primal cuts by the butcher, just had them finish/smoke the bacon and one leg. Was stunned to pay .60/lb cut/wrap on every pound of the primal cut.... they had to do zippo work.

    We are hoping to raise our own pork/butcher it next summer - excess of milk to use up. Not this winter! I am not hauling water to the pasture.... I am not.
     
  4. Cyngbaeld

    Cyngbaeld In Remembrance Supporter

    Messages:
    28,248
    Joined:
    May 20, 2004
    Location:
    SE Missouri
    I butchered a sow that was around 400# and there was practically no leaf lard. Most of the fat was a pretty even layer under the skin and not that thick, considering her size. I think the male will have more on him. He is rounder and not as active as the sow. Just have to get round to doing him.

    Butchering is a lot of work, but I put so much into my pigs that I didn't want to trust someone else to finish the job. This way I know that the pig was done right and I got everything back. I feed the skin cut up into chunks, to my dogs.
     
  5. agmantoo

    agmantoo agmantoo Supporter

    Messages:
    10,853
    Joined:
    May 22, 2003
    Location:
    Zone 7
    I got 8 pints of lard from the leaf fat of one hog. I have no idea of the weight of the lard however.
     
  6. bruceki

    bruceki Well-Known Member

    Messages:
    339
    Joined:
    Nov 16, 2009
    Pork fat is used to add fat content in various products - sausage and game meat, for instance. It might be that some of yours got used up by the shop for other purposes.

    You should be getting a 75% yield from the hanging weight. So if you think your shop is shorting you, weigh all of the packages they deliver you. If it's substantially different than 75% of the hanging weight, I'd suspect you're being ripped off.

    Next time they do a farm slaughter, look at the thickness of the back fat when they split the carcass. Two pigs that I slaughtered this summer had back fat that was 1" thick, and I ended up with 60lbs of fat/48lbs of rendered lard. I wrote up the rendering process here on my blog.

    If you're interested in lard, keep feeding your pigs until there's no dimple at the base of their tail, and their back is round, with no backbone visible. That's 2-3" of back fat, and will render out a years supply for your needs. Takes an extra month or so, and another 300lbs of food = ~$80 additional cost.