464 IH, no brakes

Discussion in 'Shop Talk' started by Glastron, Jul 15, 2004.

  1. Glastron

    Glastron New Member

    Messages:
    2
    Joined:
    Jul 15, 2004
    Hello, I need some help on changing the brake disk for this tractor. Does anyone have experience with this procedure? Will I need any special tools or equipment to get the job done?
    Thank you for your input.
     
  2. Tractorman

    Tractorman Well-Known Member

    Messages:
    198
    Joined:
    Jun 8, 2004
    Location:
    Danville,AL
    I have never worked on this tractor but seems a lot of the time there are plenty of adjustment on them. Are they wet brakes?
     

  3. Glastron

    Glastron New Member

    Messages:
    2
    Joined:
    Jul 15, 2004
    Yes, it is a wet style brake. After talking to a local tractor service center. He tells me I will have to remove the axle to locate the brake mechanisim. As well he informed me that the disk very rarely fails, but the piston o-rings do. He also mentioned as you did that I need to make sure there is plenty of Hyd oil in the system and to bleed the lines for any possible air pockets. He said if the oil ever went low and was then filled there could be air in the lines.