Homesteading Forum banner
Cancel

Media added by ScotchCollies

Here is the RV with plenty of wire to park in the shade and place the panels in the sun.

Here is the RV with plenty of wire to park in the shade and place the panels in the sun.

  • 0
  • 0
The existing batteries were connected to the panels

The existing batteries were connected to the panels

  • 0
  • 2
the charge controller is mounted in the battery bay of the RV inline fuses work best for this application

the charge controller is mounted in the battery bay of the RV inline fuses work best for this application

  • 0
  • 0
panels wired in parallel for 12 volt

panels wired in parallel for 12 volt

  • 0
  • 0
I used unisolar amorphous panels because they are More Durable and less likely to break.

I used unisolar amorphous panels because they are More Durable and less likely to break.

  • 0
  • 0
windmill is up and ready to go!

windmill is up and ready to go!

  • 0
  • 2
Finishing wiring the AC side and inverter. Battery bank in the background.

Finishing wiring the AC side and inverter. Battery bank in the background.

  • 0
  • 0
inverter and charge controller mounted on e-panel

inverter and charge controller mounted on e-panel

  • 0
  • 0
bypass for running on grid power

bypass for running on grid power

  • 0
  • 0
Disconnect for battery system

Disconnect for battery system

  • 0
  • 0
E-panel for connecting all of the wiring inside, spaced for breakers, disconnects, and lightening protection

E-panel for connecting all of the wiring inside, spaced for breakers, disconnects, and lightening protection

  • 0
  • 0
Windmill wired and ready to raise into place.

Windmill wired and ready to raise into place.

  • 0
  • 0
The bottom of the tilt up windmill tower with guy wires.

The bottom of the tilt up windmill tower with guy wires.

  • 0
  • 0
Box containing breakers, disconnect and lightening protection

Box containing breakers, disconnect and lightening protection

  • 0
  • 0
Finished panel install

Finished panel install

  • 0
  • 0
Mounting the panels on a rack

Mounting the panels on a rack

  • 0
  • 0
Top