How do you pound your t-posts in straight?

Discussion in 'Homesteading Questions' started by Judith, Dec 25, 2004.

  1. Judith

    Judith Well-Known Member

    Messages:
    658
    Joined:
    Jan 10, 2003
    How do you get these puppies in straight? I drive by farms with lovely straight rows. I went to pound some 7 footers in and they look like I had been drinkin.....I only have a sledge hammer for pounding and a stump to stand up on. Funny no one will hold them for me... :eek:
    Thanks !
     
  2. Cyngbaeld

    Cyngbaeld In Remembrance Supporter

    Messages:
    28,248
    Joined:
    May 20, 2004
    Location:
    SE Missouri
    I take the garden hose and use it to make as deep a hole as I can, trying not to get it very wide. Then I keep filling the hole with water until the ground is softened around it all the way down. Stick the t post in and push the fins down with my foot (WEAR HARD SOLED SHOES) and then pound the tops with my hammer. I can usually get them in this way unless I hit a rock. Then I move over and try another spot. Let the ground firm back up before stretching the wire.
     

  3. Judith

    Judith Well-Known Member

    Messages:
    658
    Joined:
    Jan 10, 2003
    :haha: I have to admit I had to read your post a few times! I had visions of you trying to shove a hose into the earth to make a hole.. Kay, I am blonde so the thought of you turning on the water never actually occured until after the stunned moment...
     
  4. AR Transplant

    AR Transplant Well-Known Member

    Messages:
    1,056
    Joined:
    Mar 20, 2004
    They make a post hole pounder, I have no idea what it is called, but it is a heavy metal tube like thing that is open on one end. It has metal handles on each side. You put the t-post in the place where you want it, the put the pounder on top and pound it down.
    Better yet, ask someone at the hardware store to show you one, I would guess that you could rent one or if you asked around, perhaps even borrow one.
    I would loan you the one we use,but guess what? we borrow ours from the neighbor <<smile>>

    good luck

    Arkansas Transplant
     
  5. fordy

    fordy Well-Known Member

    Messages:
    9,135
    Joined:
    Sep 13, 2003
    Location:
    Whiskey Flats(Ft. Worth) , Tx
    ..............Judy , the "old fashioned" way is with a "driver" . They consist of a piece of 2 inch pipe (heavy) , about 2 feet long with a handle on each side and you simply use your shoulders to pound them into the ground . IF , you are building a standard , 5 wire bobwire fence , with the Top wire at 4' , you only need a 6' Tpost . Don't subject yourself to more pain and suffering :eek: than is necessary . If you are building a 5 foot fence with field fence for , either dogs , goats , or horses you can get by with a 6 1/2 foot Tpost . For horses you set a piece of 2 1/2 inch(OD) pipe every 50 feet or so as a deadman . These should be set 3 feet deep in a 9 " diameter hole if your digger will dig that deep . It takes 2-80 pound sacks of sackcrete to fill a 3 foot x 9 inch diameter hole . Tposts can be set at 12 foot intervals ....IF you will install a deadman every 50 feet . Also , set BOTH Tposts and Deadmen on the OUTSIDE of the wire , so that the wire is Pushing OUT against the supports . fordy... :)

    ......... http://www.rohrermfg.com/ I had one of these air powered units for about 2 years and they work very well . You also have to have a small aircompressor with about 200 feet of line . If you have several acres of perimeter fence as well as cross fencing they would be a very wise investment . The regular drivers sold in any store that handles fencing materials will create enough pain in your shoulders and joints that you'll be calling your doctor for a remedy . The human body simply wasn't meant to drive tposts . ..fordy... :)
     
  6. uncle Will in In.

    uncle Will in In. Well-Known Member Supporter

    Messages:
    7,154
    Joined:
    May 11, 2002
    Most common way is to use a weighted post driver. Its just a heavy tube about 30 inches long with weights in one end. You slip it on the top end of the post, then stand the whole works up and start lifting the driver up and letting it drop. This lets you guide the post real neat and straight (more or less) Farm stores and hdwe. stores have them. Some have a handle welded on each side. they might be easier to handle.
     
  7. bare

    bare Head Muderator

    Messages:
    1,857
    Joined:
    May 9, 2002
    My fence lines are mostly rock, but I can always get a Tpost in with a driver. If it drives crooked, and most of them do, I just leave the driver on while I "adjust" plumb by bending the top of the post.
     
  8. kate

    kate Well-Known Member

    Messages:
    73
    Joined:
    Jul 3, 2002
    well we set our end posts in first or middle pull posts also. then stretched our top wire up. then set the posts just touching the wire(which is straight) (wire on inside, post on outside)get a limb 10 or 12 ft long and lay it on ground to mark each post. that way you get a straight line and evenly placed. if they go in a little crooked, just bend them where you want. just take your time and it helps if two people work it. count your nubbins on each post and place the next wire, do this on each post. we set posts to my eye level, (just pick a place on your body and set each post to that.) and they turn out evenly put in then. makes a nice fence.
     
  9. Cyngbaeld

    Cyngbaeld In Remembrance Supporter

    Messages:
    28,248
    Joined:
    May 20, 2004
    Location:
    SE Missouri
    :haha: :haha: :haha: Yeah, you gotta turn the water on first!

    I've tried those post pounders and didn't have enough upper body strength to do diddly squat with em.
     
  10. Beeman

    Beeman Well-Known Member

    Messages:
    6,977
    Joined:
    Dec 28, 2002
    Location:
    East TN
    I use a fence post driver as someone described and a level. I stretch a line from my corner posts and then hold my post straight and ck. it with the level. I then mark the line with a magic marker so I have a reference for straight left to right. The line also gives me reference for straight fore and aft.
     
  11. Clara Bell

    Clara Bell Well-Known Member

    Messages:
    72
    Joined:
    Dec 25, 2003
    My old fashioned driver a neighbor built me (a pipe like before mentioned) is still hanging on one of the problem post in the field I'm fencing in. He designed it with weight welded in the top and instructed me to use it like a hammer. Let the weight do the work, not me. I'm still wondering 4 days later just how far reaching that underground rock is that I can not bust.
    If I was on more level ground I would go out and buy a tractor with one of those little attachments on the back that spins a neat post hole.
    Maybe I need to inch the pole over. It might not be evenly spaced, but the important thing is that it works, protecting and keeping in the livestock.
    Homesteading keeps the brain cells alive with the challenges!
    :p
     
  12. dale

    dale Well-Known Member

    Messages:
    647
    Joined:
    May 13, 2002
    Location:
    Norwood,Missouri
  13. reluctantpatriot

    reluctantpatriot I am good without god.

    Messages:
    858
    Joined:
    Mar 8, 2003
    Location:
    Terra Planet, Sol System, Milky Way Galaxy
    Those weighted pounders are a blessing if you have to pound in posts often. Equally a blessing are the T-post pullers for when you have to move fence. With having to reconfigure the chicken yard to get them to green stuff (those chickens are worse than pigs, goats and sheep at denuding ground) to keep those homestead egg with a bright orange yolk and make happy chickens. I pull posts and pound them back in every few months when things are growing.

    After awhile your arms do get tired, but if you lean the post over and slide the pounder on, then set the post back upright, you can continue on even when tired. It might take more hits with less force to get the job done on each post, but you will build up strength and get lots of exercise. If you have a rock that stops your from pounding the posts in, just move a bit to either side of that spot to place your post.

    I prefer the manual way of doing things, despite the sweat equity involved, because I can get more tools this way and spend less money. Besides, for me homesteading isn't about labor saving. It is about a saving lifestyle that improves me through challenges and hardship. Besides, if at first you don't succeed, just get a bigger sledgehammer or post pounder. :haha: :p :) :D

    Besides, pounding posts helps you vent your frustrations by pounding the daylights out of something in a constructive manner and focusing your rage into a healthy outlet. :eek: Yes, I know this from experience from having stress. It is a good release. :D
     
  14. Shahbazin

    Shahbazin Well-Known Member

    Messages:
    395
    Joined:
    Dec 9, 2002
    We put in a couple of stakes, then string some twine between them, using the string as a guide for the T posts. We also use a post pounder to drive them - lighter models are easier to pick up, but heavier ones knock the post in faster, so it's a toss-up for me which one to use; my DH prefers the heavier pounder.
     
  15. RandB

    RandB Well-Known Member

    Messages:
    2,250
    Joined:
    Aug 13, 2002
    Location:
    southern New Jersey
    Here's another vote for the "driver" or "pounder" - we got ours at Agway.

    It was sure worth the cost (about $20) to make driving the posts so much easier. We use metal posts all the time.
     
  16. BamaSuzy

    BamaSuzy Well-Known Member

    Messages:
    951
    Joined:
    May 10, 2002
    I use a string to make a straight line, then climb on a little two-step step stool and pound them in the ground with a heavier than usual bit headed hammer. I just can't use the post thingie that is supposed to pound them in, too big for me....
     
  17. HoosierDeb

    HoosierDeb Well-Known Member

    Messages:
    278
    Joined:
    May 10, 2002
    Location:
    N. Indiana
    I have one of those t-post drivers.. they are much easier than using a hammer I would guess but I hear my nephew has one on the same principle but it has some kind of spring loading inside it that helps get it back up... I'm going to borrow it this spring!!!
     
  18. jwulf

    jwulf Member

    Messages:
    24
    Joined:
    Aug 30, 2004
    Location:
    OHIO
    I use the "driver / pounder" as well.

    I also have a "post level" that I think I got at either Home Depot or Lowes and it was pretty cheap. Mine is plastic and basically it's two plates that are joined at 90 degrees with a large rubber band, and two levels built in, one horizontal and one vertical. I think it was actually designed for use on 4x4's. But you can rubber band this to the pole and it shows the horizontal and vertical level at the same time.

    Makes it pretty easy to drive them in straight!

    -jwulf
    jwulf@cinci.rr.com
     
  19. Freeholder

    Freeholder Well-Known Member

    Messages:
    5,665
    Joined:
    Jun 19, 2004
    I use the garden hose and water method. I could borrow a driver from one of the neighbors -- it's been offered -- but I need to use tall posts. The ground here is very soft when wet, pea-soup-soft on top, so I have to set the posts deeper than might be necessary in some areas. Also, I have goats, and want to keep deer out (fat chance, but I have to try). With six or seven foot posts (for the garden fence and to support the cattle panels that make up the goat pens), I have been able to make the hole with the hose (and water, :haha: ), then reach up to finish setting it with a sledgehammer. When I use the ten-foot posts I bought for the perimeter, I may have to use the stepladder if I can't make the holes deep enough.

    The garden hose method works great for areas where you can reach with a hose, but if you are fencing a large area you'll need one of those post drivers, and maybe a big strong fella who can lift it.

    Kathleen
     
  20. Laura Workman

    Laura Workman (formerly Laura Jensen) Supporter

    Messages:
    2,475
    Joined:
    May 10, 2002
    Location:
    Lynnwood, Washington
    Sheesh, guys! I'm a 5-foot-3-inch tall woman, and using a T-post driver I've pounded 8 foot T-posts two feet into hard ground by myself. Yeah, it's work, but it's nothing like impossible. I can do 6-foot posts from the ground, but for the taller ones, I have to stand on a ladder to get them started. But it's definitely doable.