 |
|

11/26/10, 02:53 PM
|
 |
Fair to adequate Mod
|
|
Join Date: May 2002
Location: Between Crosslake and Emily Minnesota
Posts: 13,721
|
|
Since this thread has morphed from the warmest "glove" recommendation into the warmest "mitt" recommendation, I'll give you my 2¢ on that one too.
Below are my favorite warm mitts. On the left, is a pair of my USGI surplus Actic N-4B mitts and, on the right, are my old jumbo buckskin choppers with ragg wool liners.
__________________
This is the government the Founding Fathers warned us about.....
|

11/26/10, 05:00 PM
|
|
|
|
Join Date: May 2008
Location: Northern NY
Posts: 1,181
|
|
|
Use mittens, buskin choppers if you can get them like in Cabin Fevers post, with wool liners. You can get glove type or mitten type liners. They work better than any glove ever made. Gloves are about useless if you actually want to work.
Fingerless gloves work great inside a wool mitt inside choppers.
|

11/26/10, 07:09 PM
|
 |
|
|
Join Date: Aug 2010
Location: Salt Lake City, UT
Posts: 2,270
|
|
Well, now that there are pix, I can testify that my wool gloves with dense fleece liner are ragg wool mitts. Who woulda thunk?  The fiber inserts are 40gram Thinsulate.
They're fabulous!!! If only they were like 1/4" shorter!
|

11/26/10, 07:34 PM
|
|
|
|
Join Date: May 2002
Posts: 7,883
|
|
|
I shudder to think of ordering gloves or mits on line.
Gotta be able to try them on my large hands.
Can't tell ya how many gloves I have encountered that are mislabled . . .aways too small.......
When using my walk behind snow blower, my good quality snowmobile mitts are the only way to go.
|

11/26/10, 07:57 PM
|
|
Registered User
|
|
Join Date: Nov 2010
Posts: 1
|
|
Quote:
Originally Posted by d1337
Thermastat (DuPont) is a new-ish material used in some glove liners. I have some from MCR Safety that I have been quite impressed with, although your mileage may vary. One size fits most, these things stretch out quite thin and would make you question their ability to insulate. My 5 year old son can wear the same ones that I do and I wear an XL (size 10 or 11) in gloves. As it is a form fitting liner your dexterity is mostly determined by whatever you put over it. Not sure what the retail availability is for this type of liner, but if you have a safety supply company in your area you may check with them especially if you can find one that sells supplies to food processing facilities. My cost on these suggested that they would sell for less than $3.00 a pair, but are probably sold by dozens only. They are washable as well.
|
I actually work for MCR Safety and the Thermastat is a good liner. We came out with a glove called the Ninja Ice a few years back that is by far the best glove for insulation, dexterity, and grip. It is a dipped style, so if you are running fence it is best to go with a lined cowhide glove.
|

11/26/10, 09:55 PM
|
 |
|
|
Join Date: Oct 2007
Location: South Dakota
Posts: 24,108
|
|
Quote:
Originally Posted by jredd
I actually work for MCR Safety and the Thermastat is a good liner. We came out with a glove called the Ninja Ice a few years back that is by far the best glove for insulation, dexterity, and grip. It is a dipped style, so if you are running fence it is best to go with a lined cowhide glove.
|
Thanks..at that price I couldn't go wrong so I ordered them
__________________
Teach only Love...for that is what You are
|

11/26/10, 11:02 PM
|
 |
Canning Crazy
|
|
Join Date: Aug 2004
Location: Farm Country NY
Posts: 2,332
|
|
|
Oh thank you so much for this thread. My hands are always freezing outside..inside most of the time to, to tell you the truth. I am going to check out all these gloves.
__________________
Be the kind of woman that, when your feet
hit the floor each morning, the devil says
"Oh Crap, She's up!"
Tammy
|

11/26/10, 11:07 PM
|
 |
|
|
Join Date: May 2005
Location: new york
Posts: 360
|
|
|
if you have a military surplus store near you check them out. the prices usually aren't too bad.
__________________
to know and not to do is not to know
|

11/26/10, 11:52 PM
|
|
|
|
I agree with Tinknal and Cabin Fever (a Minnesota thing?). Mittens will keep your hands warmer than any gloves because the fingers keep each other warm. Ragg wool gloves inside fleece lined choppers are the way to go. You have plenty of dexterity for chopping wood, shoveling, or drilling a hole in the ice and you can take the choppers off if you need to do something with more finess.
|

11/26/10, 11:58 PM
|
 |
|
|
Join Date: Oct 2008
Location: True Northern California
Posts: 13,456
|
|
|
I love the convertable mitten glove things too- I have three pairs that I picked up when I saw them. But mine are polar fleece. The mitt cap has a piece of velcro on the backs the hold the mitt part to the back of the glove part when they are flipped open.
I don't think they are as warm as the rag one above but they do good in rain and wash easily. I think the brand name on one pair was Head???
|

11/27/10, 02:03 AM
|
|
|
|
Join Date: Feb 2003
Location: New York
Posts: 3,891
|
|
Quote:
Originally Posted by Bat Farm
I have to have some manual dexterity for my job and these are what I wear. They are wonderfully warm and the mitten top really warms your fingertips back up when you are done with needing them exposed. They are hardy (I work with concrete and re-bar) and take a lot of abuse. I wore these in Chicago in February and not only were my hands warm, the little mitten top was great place to keep my transit pass
http://www.campmor.com/outdoor/gear/Product___91894
|
Love them!! I need me about 4 pair because I will lose them, and get them wet, but they look like what I need here for feeding livestock, and carrying water, etc.
__________________
I cried because I had no shoes, until I saw a man who had no feet.
|

11/27/10, 08:53 AM
|
|
|
|
Join Date: Aug 2009
Location: CT
Posts: 260
|
|
|
Im curious about those saying they have more dexterity in mittens than gloves. Is this because your fingers arent frozen? The mittens in CFs post like very warm but also very bulky. What am i missing?
I have a pair of 10 year old snowboarding gloves that were expensive when I bought them...$75 if I remember right but they as warm as I will ever need, fingers usually sweating if I am doing any sort of work in them. Rugged and waterproof too.
|

11/27/10, 10:46 AM
|
 |
Just living Life
|
|
Join Date: May 2002
Location: Now in Virginia
Posts: 8,277
|
|
Duluth Trading company makes some really good winter gloves and guaranteed to last 5 years.
http://www.duluthtrading.com/
Any other glove I use gets killed in 6 months.
__________________
Shari
|

11/27/10, 10:58 AM
|
 |
|
|
Join Date: Mar 2008
Location: West Michigan
Posts: 1,309
|
|
|
I've spent the last two winters here in Michigan milking my cow twice a day along with chores. I normally spend one to one and a half hours outside twice a day doing farm chores. I found Muck brand boots for my feet but my hands were always cold. DH bought me a pair of gloves that not only keep my hands AND fingers warm, but I actually get too warm in them if I'm working especially hard. I feel like I've finally conquered winter.
Check out Spyder brand gloves. I think they're for skiers. They're pricey, but worth it.
__________________
~Carla~
|

11/29/10, 04:40 PM
|
|
|
|
Join Date: Feb 2005
Location: Illinois
Posts: 1,045
|
|
farmerbrian--
In my case, I am keeping my upper body warm enough with layers, of undershirt, wool shirt, vest and barn coat or carharts, that the cold isn't pulling heat & circulation away from my hands and fingers, so they stay warm, sometimes overly warm and that's enough for slipping the mitten off and doing whatever I need, wiring a fence, turning a wrench etc., then it's right back into the mitten.
I millk goats too, but I don't wear gloves for that. If I were handling a horse or cow on a lead, then I would wear gloves as well. If it's an extended job, then I keep a lighter pair of gloves in my pocket to slip on to do the job. However, I don't live in the far north where exposing skin could result in frostbite, so the other recommendations for gloves for those more lenghty cold periods would probably be a better suggestion to follow. 
jd
|

11/30/10, 08:00 PM
|
|
|
|
Join Date: May 2008
Location: Northern NY
Posts: 1,181
|
|
Quote:
Originally Posted by bergere
Duluth Trading company makes some really good winter gloves and guaranteed to last 5 years.
http://www.duluthtrading.com/
Any other glove I use gets killed in 6 months.
|
I like their stuff, but their $35.00 choppers are the same as the $12.00 ones at our local feed store. Just sayin'...
|

12/05/10, 09:34 AM
|
 |
Singletree Moderator
|
|
Join Date: May 2002
Location: Kansas
Posts: 12,972
|
|
|
When I lived in Iowa I would wear a soft pair of gloves INSIDE woolen mittens!
I AM enjoying the warmer winters where I live now!
|

12/05/10, 10:34 AM
|
|
Banned
|
|
Join Date: Feb 2008
Location: Idaho
Posts: 129
|
|
Quote:
Originally Posted by Bret4207
I like their stuff, but their $35.00 choppers are the same as the $12.00 ones at our local feed store. Just sayin'...
|
Duluth Trading is "proud" of their products. That being said, they have some of the highest quality clothes built for tradesmen/ workers.
Their firehose cloth pants are practically bulletproof and comfortable out of the box. Their work gloves are built for work.
Where else can you buy Bay rum aftershave ?
|

12/05/10, 02:48 PM
|
|
|
|
Join Date: Oct 2010
Location: SW Missouri/Eastern Kansas
Posts: 116
|
|
Quote:
Originally Posted by thermopkt
I've had good luck with the wool gloves inside my DH's plain leather work gloves. Dexterity is ok, about as good as frozen solid fingers inside more dexterous gloves. My fingers stay very warm and it's not that hard to pull off the leather glove for a couple minutes if I need to do something more 'fine tuned.'
|
I agree. I like a good thin liner with wool outer gloves.
|
| Thread Tools |
|
|
| Rate This Thread |
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 12:02 AM.
|
|