Leveling a Storage Container - Homesteading Today
You are Unregistered, please register to use all of the features of Homesteading Today!    
Homesteading Today

Go Back   Homesteading Today > General Homesteading Forums > Homesteading Questions


Reply
 
LinkBack Thread Tools Rate Thread
  #1  
Old 08/13/14, 08:15 PM
just_sawing's Avatar
Haney Family Sawmill
 
Join Date: Jan 2006
Location: Liberty,Tennessee
Posts: 1,092
Leveling a Storage Container

I am getting a 40 ft High cube container Friday and was wondering how others have leveled their containers. I removed the organic soil down to Hard pan then added flat rock and 1 1/2" crushed rock to make the base. I plan to sit the container on block with a little space under the floor.
Just wondering for those who have worked with them what did you do?
__________________
Follow me at [url]http://www.haneyfamilysawmill.com
Reply With Quote
  #2  
Old 08/13/14, 08:41 PM
TxMex's Avatar
Lady beekeeper
 
Join Date: Aug 2009
Location: NE Tx, SW Mo
Posts: 2,492
I put mine on wooden cross ties. Used a jack to lift it up and used shims(small pieces of lumber) to level it. I use the space under the high side for storage.
Reply With Quote
  #3  
Old 08/14/14, 06:09 AM
just_sawing's Avatar
Haney Family Sawmill
 
Join Date: Jan 2006
Location: Liberty,Tennessee
Posts: 1,092
Thats what I am looking at. Have you had to relevel your container with age?
__________________
Follow me at [url]http://www.haneyfamilysawmill.com
Reply With Quote
  #4  
Old 08/14/14, 09:01 AM
 
Join Date: Mar 2005
Location: Bartow County, GA
Posts: 6,778
Heck - I put one short side of my 40 footer on a railroad tie right on the ground. (the tie). The other side I put on a triangle built of 3 railroad ties - two on the bottom & one on top in the middle. Hasn't sunk or shifted in the 11 years it's been there that I can tell.
Level enough for me for hay & for storage. But then, I'm pretty low tech.
__________________
Only she who attempts the absurd can achieve the impossible
Reply With Quote
  #5  
Old 08/14/14, 01:31 PM
 
Join Date: Aug 2005
Posts: 16,310
I cant see a problem, but then I have 2 of those HEAVY ratchet jacks that have a stand on top and a peg at the bottom for eithers use. I also have 2 rail, (widow makers) jacks. Id just set one of the heavy jacks on one end after digging down around 4in so that the peg would fit underneath and do the same on the other side, then raise them to the highth I wanted, and, for me, id either leave it flat on the level ground, OR id make it high enough that cats could get underneath to find any mice rats that would maybe live there). Anyway, after getting it to the highth I wanted, and getting it level by raising one jack higher than the other, id shim it, as said, with concrete blocks, or hard wood treated timbers shoved underneath it, the squarage, the size needed, then set it down.
Reply With Quote
  #6  
Old 08/14/14, 03:20 PM
 
Join Date: Feb 2013
Location: Central Virginia
Posts: 46
For my 40 foot high cube the dozer created a flat pad (dirt) and then spread some crusher run gravel. When the truck driver slid the box off the truck the doors would open, but not perfectly. Dozer pulled it back a foot or so on the pad and it leveled out fine. Been there for 3 years without any door issues. Sitting on the gravel. It probably gets open once or twice a week. This was not the first time the dozer operator had created a pad for a high cube this way and he had not had any complaints. Your mileage may vary.
Reply With Quote
  #7  
Old 08/14/14, 04:05 PM
ChristieAcres's Avatar
 
Join Date: Apr 2009
Location: Sequim WA
Posts: 6,352
DH leveled both our shipping container and also truck box (both 40 feet long and 9'6" tall). Similar prep before he put down railroad ties. They are both leveled, know he used jacks, and the doors work fine now. One we bought a month ago and the truck box (refer unit) was given to me, but we paid to have it hauled over and placed. I'll take a look when I go out shortly.
Reply With Quote
  #8  
Old 08/14/14, 06:03 PM
just_sawing's Avatar
Haney Family Sawmill
 
Join Date: Jan 2006
Location: Liberty,Tennessee
Posts: 1,092
Thanks for the information I will get it Monday
__________________
Follow me at [url]http://www.haneyfamilysawmill.com
Reply With Quote
  #9  
Old 08/14/14, 10:55 PM
 
Join Date: Jul 2014
Posts: 1,722
Try to slope the ground under it so it will drain , then put a heavy sheet of plastic or rubber under it to keep the moisture down.
Reply With Quote
  #10  
Old 08/24/14, 07:11 AM
just_sawing's Avatar
Haney Family Sawmill
 
Join Date: Jan 2006
Location: Liberty,Tennessee
Posts: 1,092
Got it levels plumb bubble to the rear and to the door. Like it so well have another one coming Tuesday.
__________________
Follow me at [url]http://www.haneyfamilysawmill.com
Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Storage Container? greenacresusa Homesteading Questions 13 06/21/13 08:14 PM
Water Storage Container Question nightfire Survival & Emergency Preparedness 10 02/15/13 06:36 PM
Shipping Container vs. Storage Shed Reptyle Homesteading Questions 9 04/29/10 01:24 PM
storage container cabins COOL! ahahahni1 Homesteading Questions 17 11/11/08 02:30 PM
gas storage container AR Transplant Survival & Emergency Preparedness 1 03/05/08 02:56 PM


All times are GMT -5. The time now is 08:48 AM.
Contact Us - Homesteading Today - Archive - Privacy Statement - Top - ©Carbon Media Group Agriculture