Stripping Bark - Homesteading Today
You are Unregistered, please register to use all of the features of Homesteading Today!    
Homesteading Today

Go Back   Homesteading Today > General Homesteading Forums > Homesteading Questions


Reply
 
LinkBack Thread Tools Rate Thread
  #1  
Old 05/28/04, 11:38 AM
big rockpile's Avatar
If I need a Shelter
 
Join Date: Feb 2003
Location: Ozarks
Posts: 17,695
Stripping Bark

If you are stripping bark on Oak for Cabin,do you want to get a lot of the Sap Wood to? And if Logs set the Summer should they be seasoned enough? I'm figuring,by the time you get them all stripped they should be dry enough.

big rockpile
__________________
I love being married.Its so great to find that one person you want to annoy for the rest of your life.



If I need a Shelter
If I need a Friend
I go to the Rock!
Reply With Quote
  #2  
Old 05/28/04, 02:09 PM
Banned
 
Join Date: Apr 2003
Location: A woods in Wisconsin
Posts: 9,283
Strip them as soon as possible after cutting to avoid bug infestation and mold.
And, stripping them when they are fairly fresh cut, makes the job a whole lot easier.
After we built all our log railings with "dried" logs, there was still a lot more drying that occurred.
Reply With Quote
  #3  
Old 05/28/04, 06:46 PM
 
Join Date: May 2004
Location: Michigan
Posts: 381
Can you use Poplar trees to build with? We have a lot of big straight trees but I'm not sure if they are going to be good to use.
Reply With Quote
  #4  
Old 05/28/04, 07:00 PM
 
Join Date: May 2002
Posts: 7,154
Poplar is more rot resistant than most hardwoods. It is easier to nail even when its 100 years old than most wood you will find. Many old barns had poplar sawmill boards placed verticle for siding. Most of it remains solid after being in the weather 100 plus years.
Reply With Quote
  #5  
Old 05/28/04, 07:30 PM
 
Join Date: May 2004
Location: Michigan
Posts: 381
My step-father said that when dried, it was one of the hardest to nail to and you had to keep it out of the weather, because if it got moisture on it then it would rot. I figured I would check to make sure on here though to get other opinions.
Reply With Quote
  #6  
Old 05/28/04, 07:46 PM
 
Join Date: Jan 2003
Location: Northern Wisconsin
Posts: 799
Oak would be my last choice for a cabin log.....because of its tendency to crack, check and warp. But if thats what you have to work with.....made the best of it. The species of wood is far less important than the building techniques one employs.

Use only winter cut trees. Trees cut in winter have a much lower sap content and will check less.

Peel the logs ASAP.....and spray them with a mixture of bleach & TSP.....this slows the formation of mold/etc

If you know what you're doing when it comes to log home building......you can use green logs. Green logs are FAR easier to work with. They cut easier. As the logs dry, the time spent on making notches/cuts increases.
(for the record---nearly all the professional log home builders work with green logs).


Popple makes for great log cabins. Don't let anyone tell you different. I wouldn't hesitate to build using popple logs.
The same rules apply. Cut the logs in winter, when the sap is low. Peel the logs ASAP in spring.
Of course.....popple may be the lone exception to this. If one cuts popple trees in early june when the sap is at its highest.....it is by far the easiest log in the world to peel. One can peel 50' logs in just minutes.
Reply With Quote
  #7  
Old 05/29/04, 09:57 AM
Alex's Avatar  
Join Date: Mar 2003
Location: Vancouver, and Moberly Lake, BC, Canada
Posts: 833
Poplar

Peel in the late spring, early summer. If you peel when the sap runs, it is very easy to peel very quickly. Poplar logs are beautiful and great to build with.

You can peel them with a wooden "spud", an axe, a shovel or a draw knife. I prefer the draw knife for tough late fall or early spring peeling, and almost anything for summer.

They will check. If you cut is say June, and peel right away when cut, and let set for about one month while doing all the cutting, skidding and fitting, then they will be OK to build with. There will be not be too much shrinkage, and you should make allowance for one inch, just in case.

From another post of mine,

Quote:
... then put moss between and chink with 1/3 each of, sawdust, lime, and flour, mixed with water. The mixture turns out to be just about like cement, only a little flexible, so it does not crack too much. It will last over 30 years that I know about, if you make your eaves big enough to keep the water more or less off - most of the time. ...
Stripping Bark - Homesteading Questions
Me Mixing Chinking In a Wheel Barrow

This stuff works great, you can leave it unprotected, or varnish it, like we do inside (or outside), I guess you could paint it. You smooth it out with a tough-rubber clove, and kind of work the water to the surface like you do with cement/concrete. You push it in and it stays real strong.

Here is what it looks like installed,

Stripping Bark - Homesteading Questions
Poplar Walls, T&G 1x6 Pine Ceiling, and Rough 2x8 Pine floor, Pellet Stove, one of Nancy's Braided Rugs.

Stripping Bark - Homesteading Questions
Chinking Varnished At Logs Below Window. You can see one of the checks, on the lower log, that I filled with chinking (it shows up as a white line - at an angle). The windows had an allowance for two inches of settling above them, and no (zero) settling occurred.

btwThese are Poplar logs (12 to 22 inch-diameter).

Alex
__________________
Thou art That
Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 12:24 AM.
Contact Us - Homesteading Today - Archive - Privacy Statement - Top - ©Carbon Media Group Agriculture