spin off from what would you do thread - Homesteading Today
You are Unregistered, please register to use all of the features of Homesteading Today!    
Homesteading Today

Go Back   Homesteading Today > General Homesteading Forums > Homesteading Questions


Reply
 
LinkBack Thread Tools Rate Thread
  #1  
Old 11/30/09, 05:03 PM
black thumb
 
Join Date: Feb 2009
Location: Mid TN
Posts: 2,690
spin off from what would you do thread

is it unusual in a post frame building to do all exterior walls, including doors and windows then do cement and lastly do insulation, interior walls and main inside walls? thanks
Reply With Quote
  #2  
Old 11/30/09, 05:52 PM
Darren's Avatar  
Join Date: May 2002
Location: Back in the USSR
Posts: 9,948
Working concrete inside isn't unusual but placing and finishing concrete is easier when you can get to all parts of the slab from the outside.
Reply With Quote
  #3  
Old 11/30/09, 08:18 PM
 
Join Date: Jun 2009
Posts: 880
It sounds like you are talking about a pole building, rather than a post and beam?

I have only had one pole building built, so I'm no expert. But for what it is worth, the order of construction was:

1. Poles set;
2. Roof;
3. Floor poured;
4. Walls. The walls actually went in place with rough openings already cut;
5. Doors and windows. I didn't insulate.
Reply With Quote
  #4  
Old 11/30/09, 08:47 PM
texican's Avatar  
Join Date: Oct 2003
Location: Carthage, Texas
Posts: 12,261
I had my house mostly finished, except for finish work, before I poured my slab... because I built with cash, and did it all myself, and didn't have that 'big chunk' of money all at once. Once I got a chunk, I had to slab poured...
__________________
Luck is what happens when preparation meets opportunity. Seneca
Learning is not compulsory... neither is survival. W. Edwards Deming
Reply With Quote
  #5  
Old 12/02/09, 08:44 AM
 
Join Date: Dec 2002
Location: East TN
Posts: 6,977
I'm guessing they do it that way as they don't have to worry about weather for the concrete pouring. Is the concrete poured up against the metal of the walls and the metal extend down to the bottom of the concrete? This would mean the concrete is poured above grade actually sitting on top of grade. I wonder about the metal rusting at grade level.
__________________
"Education is the ability to listen to almost anything without losing your temper or your self confidence"
Robert Frost
Reply With Quote
  #6  
Old 12/02/09, 09:34 AM
black thumb
 
Join Date: Feb 2009
Location: Mid TN
Posts: 2,690
there is a treated board that acts as the concrete form. the cement does not go up to the metal. It goes to the top of the board (I think)
the ground was leveled, 4 inches of gravel as a base then there will be 4 inches of concrete.It is above grade. I think its the way pole barns are built...
Reply With Quote
  #7  
Old 12/02/09, 09:39 AM
Brenda Groth
 
Join Date: Apr 2009
Location: Michigan
Posts: 7,817
that is how we have often done it..i prefer stick building over post frame but we have done several post frame buildings and then added the concrete..and gone on from there..the biggest problem is getting the concrete INTO the building..

but it eliminates the need for most forms..which is a waste of money..remember also though that concrete around untreated wood and even some treated wood will cause rotting.
Reply With Quote
  #8  
Old 12/02/09, 01:21 PM
black thumb
 
Join Date: Feb 2009
Location: Mid TN
Posts: 2,690
we do have post protectors on....not sure what we can do about the treated wood up next to concrete.
Reply With Quote
  #9  
Old 12/02/09, 03:40 PM
 
Join Date: Jan 2004
Location: MN
Posts: 7,609
Here it is only common to do that much work with a stud framed building, not a post/pole building. It is common to pour a floor last in a wide oppen shed, but not in something that has interior walls.

Here the weather could provok one to do things in your order, if a fall contsruction & it is getting cold.

--->Paul
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 12:50 AM.
Contact Us - Homesteading Today - Archive - Privacy Statement - Top - ©Carbon Media Group Agriculture