Need a source around Tulsa for belting

[FarmboyBill]

ve tried all that I know. I need 2ft wide 1/4in thick belting, Its for the table under the auger of my 1960 Case 140W bailer. After 48yrs, the old one finally wore out,

[Old Vet]

Try Granger and see if they have it. Most any industrial suply store should have it.

[OntarioMan]

Check in the phone book for industrial rubber suppliers - the same folks who sell industrial conveyor belting will most likely have what you need.

[Windy in Kansas]

While it may be thicker you might check with your local grain elevator to see if they have an old piece of conveyor belting that would suffice and if they would allow you to have it. I expect it would be wider and need cut down.

[MELOC]

the mine where i worked at until laid-off probably has a mile or so laying around. it is a disposal problem for them. i wish i knew who their supplier was.