Belarus hydraulics

Rob30 · #1 06/03/12, 10:33 PM

Does anyone know how to turn up the hydraulic pressure relief valve setting? I have a Belarus 500 and I need more lift. The relief valve seems to let go to early. My other option is to add a separate hydraulic control for the loader. I think it would be a good option, but I am not sure how to plum into the system, especially because all the fittings are metric. Not many shops carry supplies that are metric.

**Ross** · #2 06/04/12, 05:53 AM

There are conversion fittings that turn metric to standard. Not sure how to turn up the hydraulics. I would add the seperate control theres a good chance your control seals are weak and it's losing power there. You can check your system pressure with a plug in gauge on the remote

agmantoo · #3 06/04/12, 09:02 AM

Rob30
Have you considered changing the lift cylinders with larger diameter cylinders

Rob30 · #4 06/05/12, 04:27 PM

Yes I have considered changing the cylinderes to larger ones. The cylinders I have are only single acting. But the loader is set up for 2 inch and that is what they are. I would have to have one end of the cylinders turned down to that size.
The loader is old and was made to fit the tractor, so I don't want to spend too much on it, or I might as well go find a proper belarus loader. I have thought about bypassing the stock controls and adding a joey stick control for the loader.
All of these options are costly. I was hoping to find a quicker, easier solution until I deside which direction to go with the add ons.

**Ross** · #5 06/05/12, 09:16 PM

Belarus Canada tractor talk might have an answer if you ask

Tractor Talk • Index page