Front spring bushings - Homesteading Today
You are Unregistered, please register to use all of the features of Homesteading Today!    
Homesteading Today

Go Back   Homesteading Today > Country Living Forums > Shop Talk

Shop Talk Get your mechanical questions answered here!


Reply
 
LinkBack Thread Tools Rate Thread
  #1  
Old 04/06/11, 09:18 AM
Ross's Avatar
Moderator
HST_MODERATOR.png
 
Join Date: May 2002
Location: Ontario
Posts: 12,672
Front spring bushings

Not sure I have the term correct but the bushings at the top of the front coil springs. 99 olds Alero. Can anyone tell me how to try and lube them and with what if you can? TIA
__________________
Do not meddle in the affairs of Dragons, for you are crunchy and good with ketchup........
Reply With Quote
  #2  
Old 04/06/11, 11:23 AM
HermitJohn's Avatar  
Join Date: May 2002
Posts: 7,688
I dont know what an Alero is, but are you talking about a vehicle with McPherson struts? They have what is called a tophat bearing at top and you just replace it. Very little anymore can be lubed unless its an aftermarket part that manufacturer re-engineered to have a zerk. I've never seen a tophat bearing with a zerk. Maybe if you were just absolutely determined, you could get some kind of needle thing to put on end of your grease gun?? But if you already have wobble or whatever, still needs to be replaced.

If you do replace tophat bearings on strut, mark where holes are before removing old one. There is some alignment adjustment built into this. If you dont mark holes then you will have to realign the front end.

Front spring bushings - Shop Talk

Rockauto.com calls it a "strut mounting kit" Cheapest is $30 each. Moog (top quality) is $100 http://www.rockauto.com/catalog/x,ca...,parttype,7600
__________________
"What would you do with a brain if you had one?" -Dorothy

"Well, then ignore what I have to say and go with what works for you." -Eliot Coleman

Last edited by HermitJohn; 04/06/11 at 11:36 AM.
Reply With Quote
  #3  
Old 04/06/11, 01:23 PM
 
Join Date: Dec 2003
Posts: 3,693
If you're chasing an elusive squeek up there, squirting the bushing with silicone spray can quiet things down for a bit.
Reply With Quote
  #4  
Old 04/06/11, 08:45 PM
Ross's Avatar
Moderator
HST_MODERATOR.png
 
Join Date: May 2002
Location: Ontario
Posts: 12,672
Yeah it's going to the shop anyhopw but maybe a shot of silicone spray wouldn't hurt. The car has been sitting for a while and it is quietign down.

Ref: an Alero was the last oldsmobile built, and replace the Acheiva. Just a 4 dr sedan to me, with a little 2.4 4 cyl. Not bad though, it will do 90 kph (55ish) @ 1750 rpm. That's pushing ice tires on dry pavement too.
__________________
Do not meddle in the affairs of Dragons, for you are crunchy and good with ketchup........
Reply With Quote
  #5  
Old 04/06/11, 09:06 PM
HermitJohn's Avatar  
Join Date: May 2002
Posts: 7,688
Ok, know what an Acheiva is. Bought one long time ago at auction, fixed it up, resold it and broke even. Basically labored for free. Such a shame Olds disappeared. Their division made one of best lines of gasoline V8s ever. But they had become just another GM corporate clone with nothing distinctive about them so guess you can only live on former glory for so long.
__________________
"What would you do with a brain if you had one?" -Dorothy

"Well, then ignore what I have to say and go with what works for you." -Eliot Coleman
Reply With Quote
  #6  
Old 04/06/11, 09:28 PM
Ross's Avatar
Moderator
HST_MODERATOR.png
 
Join Date: May 2002
Location: Ontario
Posts: 12,672
Cheap grocery getter. Very little rust needs very little, low kms, got it for about the price of scrap.
__________________
Do not meddle in the affairs of Dragons, for you are crunchy and good with ketchup........
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 02:46 PM.
Contact Us - Homesteading Today - Archive - Privacy Statement - Top - ©Carbon Media Group Agriculture